Update.zip not working on V2 watch (and possibly also V3)

Some tips to resolve problems with the T-WATCH-2020
mchavez
Site Admin
Posts: 84
Joined: Tue Nov 10, 2020 12:12 am

Re: Update.zip not working on V2 watch (and possibly also V3)

Post by mchavez »

Hi,

Could you try again with the "Debug" option enabled? We released some adjustments and new log info specific to the V2 version. We believe that for some reason the startup code does not reach the code for turn on the screen.
vins87
Posts: 1
Joined: Fri Jul 02, 2021 8:52 am

Re: Update.zip not working on V2 watch (and possibly also V3)

Post by vins87 »

same problem.
Also tried new file from https://twatchbuilder.com/downloads/uploader_v2.zip
blank screen, so i can't get deviceID.
is there another way from serial to get the deviceID.
could you share you code so i can help you to compile it for twatch v2?
thanks
mchavez
Site Admin
Posts: 84
Joined: Tue Nov 10, 2020 12:12 am

Re: Update.zip not working on V2 watch (and possibly also V3)

Post by mchavez »

We deactivate versions V2 and V3 until new advice.

This is because the last update of the LilyGO SDK changed the boards versions and there are new "revisions" (T-Watch Base, T-Watch-2020-V1, T-Watch-2020-V2) and there is not board specific for V3. In the previous version the board was the same for all the watches. Because of that we need to analyze this new information in detail.

Image

For now only V1 will be supported.

Sorry for the inconvenience
Post Reply